I/O APIC #5 Version 17 at 0xFEC01000. I/O APIC #6 Version 17 at 0xFEC02000. Processors: 2 Kernel command line: auto BOOT_IMAGE=linux ro root=808 BOOT_FILE=/boot/vmlinuz-2.4.18-PE4600-P4-3 Initializing CPU#0 Detected 1791.233 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3565.15 BogoMIPS Memory: 2061812k/2097088k available (1065k kernel code, 34892k reserved, 296k data, 204k init, 1179584k highmem) Dentry-cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes) Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU0: Intel(R) XEON(TM) CPU 1.80GHz stepping 04 per-CPU timeslice cutoff: 1462.83 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000040 ESR value after enabling vector: 00000000 Booting processor 1/2 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3578.26 BogoMIPS CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU1: Intel(R) XEON(TM) CPU 1.80GHz stepping 04 Total of 2 processors activated (7143.42 BogoMIPS). WARNING: No sibling found for CPU 0. WARNING: No sibling found for CPU 1. ENABLING IO-APIC IRQs Setting 4 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 4 ... ok. Setting 5 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 5 ... ok. Setting 6 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 6 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 4-0, 4-10, 4-11, 4-13, 6-15 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. number of MP IRQ sources: 50. number of IO-APIC #4 registers: 16. number of IO-APIC #5 registers: 16. number of IO-APIC #6 registers: 16. testing the IO APIC....................... IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 04000000 ....... : arbitration: 04 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 003 03 0 0 0 0 0 1 1 31 01 003 03 0 0 0 0 0 1 1 39 02 001 01 1 0 0 0 0 0 0 00 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 0 0 0 0 0 1 1 69 09 003 03 0 0 0 0 0 1 1 71 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 003 03 0 0 0 0 0 1 1 79 0d 000 00 1 0 0 0 0 0 0 00 0e 003 03 0 0 0 0 0 1 1 81 0f 003 03 0 0 0 0 0 1 1 89 IO APIC #5...... .... register #00: 05000000 ....... : physical APIC id: 05 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 05000000 ....... : arbitration: 05 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 003 03 1 1 0 1 0 1 1 91 01 003 03 1 1 0 1 0 1 1 99 02 003 03 1 1 0 1 0 1 1 A1 03 003 03 1 1 0 1 0 1 1 A9 04 003 03 1 1 0 1 0 1 1 B1 05 003 03 1 1 0 1 0 1 1 B9 06 003 03 1 1 0 1 0 1 1 C1 07 003 03 1 1 0 1 0 1 1 C9 08 003 03 1 1 0 1 0 1 1 D1 09 003 03 1 1 0 1 0 1 1 D9 0a 003 03 1 1 0 1 0 1 1 E1 0b 003 03 1 1 0 1 0 1 1 E9 0c 003 03 1 1 0 1 0 1 1 32 0d 003 03 1 1 0 1 0 1 1 3A 0e 003 03 1 1 0 1 0 1 1 42 0f 003 03 1 1 0 1 0 1 1 4A IO APIC #6...... .... register #00: 06000000 ....... : physical APIC id: 06 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 06000000 ....... : arbitration: 06 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 003 03 1 1 0 1 0 1 1 52 01 003 03 1 1 0 1 0 1 1 5A 02 003 03 1 1 0 1 0 1 1 62 03 003 03 1 1 0 1 0 1 1 6A 04 003 03 1 1 0 1 0 1 1 72 05 003 03 1 1 0 1 0 1 1 7A 06 003 03 1 1 0 1 0 1 1 82 07 003 03 1 1 0 1 0 1 1 8A 08 003 03 1 1 0 1 0 1 1 92 09 003 03 1 1 0 1 0 1 1 9A 0a 003 03 1 1 0 1 0 1 1 A2 0b 003 03 1 1 0 1 0 1 1 AA 0c 003 03 1 1 0 1 0 1 1 B2 0d 003 03 1 1 0 1 0 1 1 BA 0e 003 03 1 1 0 1 0 1 1 C2 0f 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 1:0 IRQ17 -> 1:1 IRQ18 -> 1:2 IRQ19 -> 1:3 IRQ20 -> 1:4 IRQ21 -> 1:5 IRQ22 -> 1:6 IRQ23 -> 1:7 IRQ24 -> 1:8 IRQ25 -> 1:9 IRQ26 -> 1:10 IRQ27 -> 1:11 IRQ28 -> 1:12 IRQ29 -> 1:13 IRQ30 -> 1:14 IRQ31 -> 1:15 IRQ32 -> 2:0 IRQ33 -> 2:1 IRQ34 -> 2:2 IRQ35 -> 2:3 IRQ36 -> 2:4 IRQ37 -> 2:5 IRQ38 -> 2:6 IRQ39 -> 2:7 IRQ40 -> 2:8 IRQ41 -> 2:9 IRQ42 -> 2:10 IRQ43 -> 2:11 IRQ44 -> 2:12 IRQ45 -> 2:13 IRQ46 -> 2:14 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1791.2585 MHz. ..... host bus clock speed is 99.5142 MHz. cpu: 0, clocks: 995142, slice: 331714 CPU0 cpu: 1, clocks: 995142, slice: 331714 CPU1 checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0x2) All processors have done init_idle PCI: PCI BIOS revision 2.10 entry at 0xfc67e, last bus=15 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 2: assuming transparent PCI: Discovered primary peer bus 01 [IRQ] Unknown bridge resource 0: assuming transparent PCI: Discovered primary peer bus 03 [IRQ] PCI: Discovered primary peer bus 0a [IRQ] PCI: Discovered primary peer bus 0f [IRQ] PCI: Using IRQ router ServerWorks [1166/0201] at 00:0f.0 PCI->APIC IRQ transform: (B0,I4,P0) -> 19 PCI->APIC IRQ transform: (B0,I6,P0) -> 18 PCI->APIC IRQ transform: (B1,I6,P0) -> 22 PCI->APIC IRQ transform: (B2,I6,P0) -> 20 PCI->APIC IRQ transform: (B2,I6,P1) -> 21 PCI->APIC IRQ transform: (B4,I1,P0) -> 28 PCI->APIC IRQ transform: (B5,I0,P0) -> 27 PCI->APIC IRQ transform: (B10,I6,P0) -> 35 PCI->APIC IRQ transform: (B10,I8,P0) -> 31 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded pty: 256 Unix98 ptys configured Real Time Clock Driver v1.10e block: 128 slots per queue, batch=32 eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others eth0: Intel Corp. 82557 [Ethernet Pro 100], 00:B0:D0:FC:71:67, IRQ 19. Receiver lock-up bug exists -- enabling work-around. Board assembly 07195d-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). Receiver lock-up workaround activated. eth1: OEM i82557/i82558 10/100 Ethernet, 00:02:B3:9E:60:8D, IRQ 35. Board assembly a64083-001, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. Secondary interface chip i82555. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xb874c1d3). eth2: OEM i82557/i82558 10/100 Ethernet, 00:02:B3:9E:60:88, IRQ 31. Board assembly a64083-001, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. Secondary interface chip i82555. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xb874c1d3). SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4 aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs megaraid: v1.18 (Release Date: Thu Oct 11 15:02:53 EDT 2001) megaraid: found 0x101e:0x1960:idx 0:bus 5:slot 0:func 0 scsi3 : Found a MegaRAID controller at 0xf880c000, IRQ: 27 scsi3 : Enabling 64 bit support megaraid: [161J:3.17] detected 2 logical drives megaraid: channel[1] is raid. megaraid: channel[2] is raid. scsi3 : LSI Logic MegaRAID 161J 254 commands 16 targs 5 chans 7 luns scsi3: scanning channel 0 for devices. Vendor: PE/PV Model: 1x2 SCSI BP Rev: 0.25 Type: Processor ANSI SCSI revision: 02 scsi3: scanning channel 1 for devices. Vendor: PE/PV Model: 1x8 SCSI BP Rev: 0.25 Type: Processor ANSI SCSI revision: 02 scsi3: scanning virtual channel 1 for logical drives. Vendor: MegaRAID Model: LD0 RAID1 17278R Rev: 161J Type: Direct-Access ANSI SCSI revision: 02 Vendor: MegaRAID Model: LD1 RAID5 34556R Rev: 161J Type: Direct-Access ANSI SCSI revision: 02 scsi3: scanning virtual channel 2 for logical drives. scsi3: scanning virtual channel 3 for logical drives. scsi3: scanning virtual channel 4 for logical drives. Attached scsi disk sda at scsi3, channel 2, id 0, lun 0 Attached scsi disk sdb at scsi3, channel 2, id 1, lun 0 SCSI device sda: 35385344 512-byte hdwr sectors (18117 MB) Partition check: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > SCSI device sdb: 70770688 512-byte hdwr sectors (36235 MB) sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 > Attached scsi generic sg0 at scsi3, channel 0, id 6, lun 0, type 3 Attached scsi generic sg1 at scsi3, channel 1, id 6, lun 0, type 3 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 204k freed Adding Swap: 2096440k swap-space (priority -1) Adding Swap: 2096472k swap-space (priority -2) Adding Swap: 2096472k swap-space (priority -3) Adding Swap: 2096440k swap-space (priority -4) EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,8), internal journal md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,17), internal journal EXT3-fs: mounted filesystem with ordered data mode. inserting floppy driver for 2.4.18-PE4600-P4-3 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A parport0: PC-style at 0x378 (0x778) [PCSPP(,...)] parport0: irq 7 detected Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ServerWorks CSB5: IDE controller on PCI bus 00 dev 79 ServerWorks CSB5: chipset revision 147 ServerWorks CSB5: not 100% native mode: will probe irqs later ServerWorks CSB5: simplex device: DMA disabled ide0: ServerWorks CSB5 Bus-Master DMA disabled (BIOS) ServerWorks CSB5: simplex device: DMA disabled ide1: ServerWorks CSB5 Bus-Master DMA disabled (BIOS) hda: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 24X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.12